Motorized Moving Target Stand This is a moving target stand I came up with back in 2009. I figured it would be good practice for IDPA type shooting or just some fun shooting in general. Here is a video of the stand in action. (sorry for the screwed up sound) The track of the frame …
Homemade Bullet Feeder This is a Homemade Bullet Feeder that I designed back in 2009 for a Dillon XL650 to feed Hollow Base Wadcutter Bullets. Back then there were not many commercial bullet feeders available that were affordable and none designed to feed Hollow Based Wad Cutters. (I still don’t think there are to this …
Extended Slide Release This is a extended slide release I made for a Beretta U22 Neos for speeding up reloads during action shoots. The stock slide release button on the Noes is tiny. I run a custom grip on my pistol that is molded to my hand and to activate the stock release I would …
Primer Tube Filler This was just another one of those projects I made to see if I could. I made this back in 2009 so details are a little fuzzy. I think I probably figured out the primer sorter mechanism by looking at Dillon’s RF-100 Filler but there was no way I’d ever spend hundreds …
Reloading Scale Check Weights These are a simple set of check weights I turned from a piece of brass on the Mini Lathe. They were made just to check the constancy of the scale over time not to actually calibrate it. At the time I made them I checked what they would weigh in grains …
Clamp On Spotting Scope Mount This was just a quick simple project to make a quick clamp on mount for my spotting scope. It uses a cheap Ratcheting Bar Clamp/Spreader commonly available for around $5 from places like Harbor Freight. I should have patented this because after I showed up at my club with it …
Weighted Magazine Base Plates These are my custom made weighted magazine base plates. I shoot bowling pin matches at my local club and speedy reloads are the key to winning. The new bases ensure the magazines eject fast and clean from the pistol as soon as I press the magazine release button. The extended base …
S&W 4506 Magazine Holder This is a Duel Magazine Holder for S&W 4506 Mags. I made this just for shooting competitions so I’m not sure if it would be suitable/comfortable for everyday carry. I’m still playing around with the infill used on the retention spring for proper tension as it might weaken over time but …
Nano Mortar’s These are a couple of tiny mortar type cannons I made back in 2009. They were fun little projects to make and it were pretty quick to machine up. The plans for this first mortar are not mine they originally came from TheFirearmBlog.com. Here is my first Nano Mortar it is in all it’s …
410 Reloading Tools These are my homemade 410 Reloading Tools that I made back in 2010. They are just like the old school Lee Loaders. I machined them from aluminum bar stock on my mini lathe using the TLAR method (That Looks About Right) using a 410 shell as a guide. (sorry I don’t have any …