January 3, 2019 Squarebill Crankbait This is a Squarebill Crankbait that I found on Thingiverse designed by Reid Robinson. I’ve been meaning to try designing one of these myself but decided to just try this one because it looked well done and I have a back log of projects already. Just like my designs it …
June 5, 2018 Crankbait Reboot STL files for this design are available on Printables and can be found HERE. This is a reboot of a crankbait I made probably 25 years ago I’m just doing a modernized version of it using CAD and 3D printing. The original crankbait was carved from balsa wood, the lip …
This is the process I go through to build these lures. I start by using the appropriate size drill bit to clean out the alignment pin holes. Next I cut three pieces of 1.75mm filament each about 1/8″ long. I then Insert the pieces of filament into the alignment holes. I test the fit to …
August 19, 2016 3D Printed Crankbaits STL files for these lures are available at Printables and can be found HERE. This is my first go at designing a full size printed Crankbait. I had so much fun designing the tiny ultralight crankbait while those were printing I jumped back into Solidworks and came up with …